BSTXR - SODIUM BORATE, 10-HYDRATE, 3570
- MSDS: BSTXR
- Manufacturer: J T BAKER INC
- Product Name: SODIUM BORATE, 10-HYDRATE, 3570
- National Stock Number: 6810-00-300-5130
Product Identification
Product ID:SODIUM BORATE, 10-HYDRATE, 3570
MSDS Date:05/01/1989
FSC:6810
NIIN:00-300-5130
MSDS Number: BSTXR
Responsible Party
PHILLIPSBURG, NJ 08865
US
Emergency Phone: 800-424-8802;800-424-9300(CHEMTREC)
Info Phone: 201-839-2151
Cage: DO803
Contractor
Telephone: 800-582-2537
Cage: 70829
Ingredients
SODIUM BORATE, DECAHYDRATE; (SODIUM BORATE, 1O HYDRATE)
CAS: 1303-96-4
RTECS: VZ2275000
Fraction By Weight: 99-100%
OSHA PEL 10 MG/M3
ACGIH TLV: 5 MG/M3
Hazards
LD50 LC50 Mixture:LD50:(ORAL,RAT)2660 MG/KG
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHAL/SKIN/EYE/SKIN ABSORP:
NONE IDENTIFIED. INGEST: NAUSEA, VOMITING. HARMFUL IF
SWALLOWED/INHALED. CHRONIC: NONE IDENTIFIED.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE IDENTIFIED.
First Aid
First Aid:INGEST: CALL A PHYSICIAN. IF SWALLOWED, IF CONSCIOUS, IMMED
INDUCE VOMITING. INHAL: REMOVE TO FRESH AIR. IF NOT BREATHING, GIVE
ARTF RESP. IF BREATHING IS DFCLT, GIVE OXYGEN. SKIN: FLUSH WITH
WATER. E YE: IMMED FLUSH WITH PLENTY OF WATER FOR AT LEAST 15
MINUTES.
Fire Fighting
Extinguishing Media:USE EXTINGUISHING MEDIA APPROPRIATE FOR SURROUNDING
FIRE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE IDENTIFIED BY MFR.
Accidental Release
Spill Release Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE CLOTHING. W/CLEAN SHOVEL, CAREFULLY PLACE MATERIAL INTO
CLEAN, DRY CONTAINER AND COVER; REMOVE FROM AREA. FLUSH SPILL AREA
WITH WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP CONTAINER TIGHTLY CLOSED.
SUITABLE FOR ANY GENERAL CHEMICAL STORAGE AREA. AVOID CONT
W/EYES/SKIN/CLTHG. AVOID BREATHING DUST.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:NONE REQUIRED WHERE ADEQUATE VENTILATION
CONDITIONS EXIST. IF AIRBORNE CONC IS HIGH, A NIOSH/MSHA APPROVED
DUST/MIST RESPIRATOR IS RECOMMENDED. IF CONC EXCEEDS CAPACITY OF
RESPIRATOR, A NIOSH/MSHA APP ROVED SCBA IS ADVISED.
Ventilation:USE GENERAL OR LOCAL EXHAUST VENTILATION TO MEET TLV
REQUIREMENTS.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:LAB COAT.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
Boiling Pt:B.P. Text:608F,320C
Melt/Freeze Pt:M.P/F.P Text:167F,75C
Spec Gravity:1.73(H*2O=1)
Solubility in Water:MODERATE (1-10%)
Appearance and Odor:WHITE CRYSTALS, ODORLESS
Percent Volatiles by Volume:0
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS, METALLIC SALTS.
Stability Condition to Avoid:NONE DOCUMENTED.
Hazardous Decomposition Products:OXIDES.
Disposal
Waste Disposal Methods:DISPOSE I/A/W ALL APPLICABLE FEDERAL, STATE, AND
LOCAL ENVIRONMENTAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.